Transmission Driven Pulley Installation - Toro 30284 Service Manual

GEAR DRIVE
11. Remove the set screw from the driven pulley (Fig.
1082).

Transmission Driven Pulley Installation

1. Apply anti-seize to the transmission driveshaft (Fig.
1083).
7
7-10
Fig 1082 PICT-1515
Fig 1083 PICT-1564
2. Insert the key into the keyway on the transmission
driveshaft (Fig. 1084).
Fig 1084
3. Apply thread locking compound to the driven pulley
set screw (Fig. 1085).
Fig 1085
Floating Deck Mid-Size Service Manual
PICT-1566
PICT-1567a