ELECTRICAL
3. Slide the harness wire (red) onto the solenoid term-
inal (Fig. 1555):
4. Position the battery cable onto the solenoid terminal,
over the red harness wire. Install a lockwasher and
nut to secure. Position the boot over the connection
(Fig. 1556).
9
9-50
Fig 1555
PICT-1882
Fig 1556
PICT-1880
5. Position the starter cable onto the solenoid terminal.
Install a lockwasher and nut to secure (Fig. 1557).
Fig 1557
6. Connect the negative battery cable to the battery.
Floating Deck Mid-Size Service Manual
PICT-1920