Toro 30284 Service Manual page 247

ENGINE
24. Remove the bolt, 2 spring washers and fl at washer
securing the clutch to the engine crankshaft. Lower
the clutch off the engine crankshaft (Fig. 0806).
25. Using a spring removal tool (Toro P/N 92-5771),
5
unhook the hydro drive idler spring and remove it
from the chassis (Fig. 0807).
5-6
Fig 0806 PICT-0299
Fig 0807 PICT-0300
26. Remove the hydro drive belt from around the engine
crankshaft pulley (Fig. 0808).
Fig 0808
27. Slide the drive pulley off the engine crankshaft (Fig.
0809).
Fig 0809
Floating Deck Mid-Size Service Manual
PICT-0302a
PICT-0303