Tracking Adjustment (T-2); Neutral Adjustment (T-2) - Toro 30284 Service Manual

LINKAGE

Tracking Adjustment (T-2)

1. If the machine does not track straight, adjustment is
required.
2. Check the rear tire pressure. Refer to Specifi cations
for proper tire pressure.
3. Loosen the wing nuts on the right control rod and
rotate the turnbuckle in or out to ensure the right
side control lever is centered in the neutral lock
position. Secure the turnbuckle in position with the
wing nuts (Fig. 0776).
4
A. Turnbuckle
B. Bottom wing nut
4-130
C
A
B
Fig 0776 fi g. 36 G006085
C. Top wing nut (left hand
threaded)
4. Loosen the wing nuts on the left control rod and
rotate the turnbuckle in or out to change the tracking.
Secure the turnbuckle in position with the wing nuts
(Fig. 0776).
5. Check for proper tracking. Adjust the left control rod
if a change is needed.

Neutral Adjustment (T-2)

Important: Ensure the tracking of the mower is
correct after adjusting the motion control levers.
After adjusting the tracking, the motion control
levers may not align exactly front to back (Fig.
0777).
A
Fig 0777
A. Left motion control
lever
B. Right motion control
lever
Floating Deck Mid-Size Service Manual
B
C
D
fi g. 52 G006096
C. Neutral locked position
D. Align the control levers
front to back here