Displayed Signals (Run Menu Scroll Sequence - Quick Reference) - Ametek 241CE II Operator's Manual

Displayed Signals (RUN Menu Scroll Sequence – Quick
Reference)

NOTE
The RUN menu scrolls automatically and displays, continually, in the fol-
lowing order:
Displayed
Abbreviation Description
M241 Vx.xx Firmware Version x.xx
(Displayed only in first scroll cycle following
a power-up or reset.)
RT Run Time (Days:Hours:Minutes)
Stage Stage of Dewpoint Cycle
PTime Purge Time
(Displayed only if measuring cycle is in
Purging/Hold Stage.)
WDP* External Water Dewpoint Temperature
HCDP Hydrocarbon Dewpoint Temperature
WCt** External Water Content
MTemp Mirror Temperature
WMir Water Phototransistor Signal
HCMir Hydrocarbon Phototransistor Signal
* External Water Dewpoint Temperature (optional).
** External Water Content (optional).
Detailed information about the signals that are displayed on the User
Interface can be found in Chapter 4 (see "RUN Menu").
Metric Units Imperial Units
—
000 00:00 000 00:00
(Purging/Hold, Cooling, or Warming)
minutes minutes
< -40.0 °C < 40.0 °F
< -40.0 °C < 40.0 °F
< 0.0 mg/m < 0.0 lb/MMcf
3
(PPMV or PPMW) (PPMV or PPMW)
21.3 °C 70.4 °F
59
103
Installation and Start-Up
—
59
103
|
3-29