Displayed Signals (Run Menu Scroll Sequence - Quick Reference) - Ametek 241CE II User Manual

Displayed Signals (RUN Menu Scroll Sequence – Quick
Reference)
The RUN menu scrolls automatically and displays, continually, in the following
order:
Displayed
Abbreviation Description
M241 Vx.xx
RT
Stage
PTime
WDP*
HCDP
WCt**
MTemp
WMir
HCMir
*External Water Dewpoint Temperature (optional).
**External Water Content (optional).
PN 903-8797, Rev A
Detailed information about the signals that are displayed on the User
Interface can be found in Chapter 3 (see "Working in the RUN Menu").
Firmware Version x.xx
(Displayed only in first scroll cycle fol-
lowing a power-up or reset.)
Run Time (Days:Hours:Minutes)
Stage of Dewpoint Cycle
Purge Time
(Displayed only if measuring cycle is in
Purging/Hold Stage.)
External Water Dewpoint Temperature
Hydrocarbon Dewpoint Temperature
External Water Content
Mirror Temperature
Water Phototransistor Signal
Hydrocarbon Phototransistor Signal
Metric Units Imperial Units
—
000 00:00 000 00:00
(Purging/Hold, Cooling, or Warming)
minutes minutes
< -40.0 °C <40.0 °F
< -40.0 °C <40.0 °F
3
<0.0 mg/m <0.0 lb/MMcf
(PPMV or PPMW) (PPMV or PPMW)
21.3 °C
59
103
Installation and Start-Up
—
70.4 °F
59
103
|
2-29