Supplemental Information - Where Can I Find It - Ametek 241CE II Operator's Manual

Supplemental Information – Where Can I Find It?
1-10 | Model 241CE II Hydrocarbon Dewpoint Analyzer
Some analyzers are configured with optional equipment, that may require
supplementary information. The analyzer manual and this additional
information (not part of the main manual) – collectively known as the
Documentation Package – is included on the Documentation Package DVD
shipped with the analyzer.

If a hard copy of the analyzer manual is ordered, the additional informa-
tion will be located in the "Supplemental Information" section of the
NOTE
manual. See Chapter 7 for ordering information.
The Documentation Package DVD includes the following:
• The "Manual" folder contains the main analyzer manual, the System
200 Configurator Software manual (optional), and any other manuals
for standalone equipment that support the analyzer.
• The "Supplemental Information" folder can include documents called
Manual Supplements that describe and illustrate installation, operation,
layout, and maintenance procedures for non-standard or optional
equipment that make up your analyzer and its sample system.
This folder can also contain:
- 241_Dewpoint Monitor Data Sheets, which list the critical analyzer
operating parameters.
- 241_EEPROM Data Sheets, which list the factory-default configura-
tion settings of all programmable analyzer parameters.
- 241_Signed Final QC (Quality Control) Document, which includes
AMETEK Testing Quality Control information, including Gas Run
Data, for the analyzer.
- 241_Final As-Built drawings (if applicable). Note that these drawings
are not available for analyzers with "S####-#" in their serial num-
bers (e.g., "AB-241-S1234-5"). If these drawings are not included, use
the drawings in the manual.
- Other customer-specific information may also be included (if ap-
plicable), such as Product Data Sheets, a Custom Spare Parts list, or
analyzer Certificates.