Safety Notes; Electrical Safety; Grounding - Ametek 241CE II Operator's Manual

Safety Notes

WARNINGS, CAUTIONS, and NOTES contained in this manual emphasize critical instructions
as follows:
!
An operating procedure which, if not strictly observed, may result in personal injury or envi-
ronmental contamination.
WARNING
– but are not limited to – Warnings.
!
An operating procedure which, if not strictly observed, may result in damage to the equipment.
CAUTION

Important information that should not be overlooked.
NOTE

Electrical Safety

High voltages are present in the analyzer housings. Always shut down power source(s) before
performing maintenance or troubleshooting. Only a qualified electrician should make electrical
connections and ground checks.
Any use of the equipment in a manner not specified by the manufacturer may impair the safety
protection originally provided by the equipment.

Grounding

Instrument grounding is mandatory. Performance specifications and safety protection are void if
instrument is operated from an improperly grounded power source.
!
Verify ground continuity of all equipment before applying power.
WARNING
Essential Health and Safety Requirements are also included in
Contents | vii