Eu Declaration Of Conformity - Ametek 241CE II Operator's Manual

EU Declaration of Conformity

Manufacturer's Name:
Manufacturer's Address:
EU Representative Address:
Declare under our sole responsibility that the product:
Product Name:
Model Number:
Marking:
Conforms to the following EU Standards and Directives:
Electromagnetic Compatibility Directive 2014/30/EU using the following standards:
EN 61326-1
EN 55011 (CISPR 55011)
EN 55011 (CISPR 55011)
EN 61000-3-2
EN 61000-3-3
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
EN 61000-4-11
Restriction of Hazardous Substances Directive 2011/65/EU (RoHS 2).
Pressure Equipment Directive 2014/68/EU
Article 4, Paragraph 3
PN 903-8647 Rev I
EU Declaration of Conformity
AMETEK Canada
A Division of AMETEK Process & Analytical Instruments
(ISO 9001:2008 Registered)
2876 Sunridge Way N.E.
Calgary, Alberta, Canada T1Y 7H9
Phone: (403) 235-8400 / Fax: (403) 248-3550
AMETEK Precision Instruments Europe GmbH
Rudolf-Diesel-Str. 16
D-40670 Meerbusch, Germany
Phone: 49-2159 91 36 0 / Fax: 49-2159 91 36 80
Hydrocarbon Dewpoint Analyzer
241CE II
II 2 G Ex db IIB T4 Gb
Electrical equipment for measurement, control and laboratory use – EMC requirements –
Part 1: General requirements.
Radiated Electromagnetic Emissions, Class A 30 MHz to 1 GHz.
Conducted Electromagnetic Emissions, Class A.
Limits for harmonic current emissions (equipment input current ≤ 16 A per phase).
Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply
systems, for equipment with rated current ≤16 A per phase and not subject to conditional
connection.
Testing and measurement techniques – Electrostatic discharge immunity test.
Testing and measurement techniques – Radiated, radio-frequency, electromagnetic field
immunity test.
Testing and measurement techniques – Electrical fast transient/burst immunity test.
Testing and measurement techniques – Surge immunity test.
Testing and measurement techniques – Immunity to conducted disturbances, induced by
radio-frequency fields.
Testing and measurement techniques – Power frequency magnetic field immunity test.
Testing and measurement techniques – Voltage dips, short interruptions and voltage
variations immunity tests.
A DIVISION OF AMETEK PROCESS & ANALYTICAL INSTRUMENTS
Canada
Western Research
Page 1 of 2
Contents | xiii