Creating An Edid - Easy Edid Creator; Control Menu; Ethernet - Lightware MMX2 Series User Manual

   
5. Software Control - Lightware Device Controller
5.6.4. Creating an EDID - Easy EDID Creator
Since the Advanced EDID Editor mentioned above needs more complex knowledge about
EDID, Lightware introduced a wizard-like interface for fast and easy EDID creation. With Easy
EDID Creator, it is possible to create custom EDIDs in four simple steps. By clicking on the Create button
below the Source panel, Easy EDID Creator is opened in a new window. For more details about EDID Editor
please visit our website (www.lightware.com) and download the EDID Editor Application note.
EDID Creator Window
Applied firmware package: v1.3.3b3 | LDC software: v2.5.14b5
MMX2 series – User's Manual
5.7. Control Menu
CREATE
5.7.1. Ethernet
Five ports are displayed in the Ethernet settings: Three of them belong to the RJ-45 Ethernet connectors. You
can check the status of the Ethernet line by each ports: the speed and the duplexity of the connection. The
remaining two are for configuring the Ethernet layer in the USB-C ports.
The following settings are available for each ports:
▪ Rename the port
▪ Enable / disable the port;
Ethernet tab in Control menu
38