Crosspoint Menu; Grid View - Lightware MX2-8x8-HDMI20-L User Manual


  
6. Software Control – Lightware Device Controller
6.4. Crosspoint Menu
6.4.1. Grid View
Grid view is a user-friendly graphical interface displaying the crosspoint state of the matrix router. This is an
easy way to change between the input sources and output sinks.
1
5
6
7
Crosspoint menu of the MX2-24x24-DH-12DPi-R model
MX2-HDMI20 series – User's Manual
2
3 4
8 9
Device Label The Device Discovery window can be opened by clicking on this ribbon. The
1
Device Label is displayed which is not the same as the Product Name. The
Product name is displayed in a hint box when the mouse cursor is above
the box. See more information in
Label section.
Main Menu The available menu items are displayed. The active one is highlighted with
2
a dark grey background color
Navigation Panel When the matrix size is too big to display all inputs and outputs, clicking on
3
the navigation bar scrolls up and down or left and right direction to reach
the other ports.
Standby Switch The device can be switched to Standby Mode or wake up from this mode by
4
the button. When the matrix is in standby mode the video transmission is
disabled and the LCD is switched off. Remote connections (LAN, RS-232)
remain enabled.
Tab Selector Select the desired Grid View, Tile View, or Presets tab.
5
Ribbon
Input Ports Each number represents an input port. Click on the port to display the Port
6
Properties window.
Connections Grey square means the port is available but there is no connection. White
7
square means there is a connection between the input and the output port.
Output Ports Each number represents an output port. Click on the port to display the Port
8
Properties window.
Advanced View Displaying the Advanced view page, showing the Terminal window and the
9
LW3 protocol tree.
29
Status Tab section, and Setting the Device