Installing A Gpu - Dell EMC PowerEdge R7525 Installation And Service Manual

Figure 103. Installing the metal filler bracket
Next steps
1. Replace the GPU.

Installing a GPU

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. If installing a new expansion card, unpack it and prepare the card for installation.
NOTE: For instructions, see the documentation accompanying the card.
4. Remove the GPU air shroud top cover
Steps
1. To install the GPU on Riser 1:
a. Align the connector on the GPU with the connector on the riser.
b. Insert the GPU into the riser until it is fully seated.
c. Close the expansion card holder latch.
d. Press the black card holder latch on the GPU and riser to secure the GPU card to the riser.
e. Connect the GPU power cable to the GPU card.
126 Installing and removing system components
Safety instructions
Before working inside your system
on page 26.
on page 27.