Removing A Cooling Fan - Dell EMC PowerEdge R7525 Installation And Service Manual

Figure 35. Installing the cooling fan cage assembly
Next steps
1. If removed, install the air
2. Follow the procedure listed in

Removing a cooling fan

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. If installed, remove the air
Steps
Press the orange release tab and lift the cooling fan to disconnect the fan from the connector on the system board.
NOTE: The procedure to remove standard, high-performance (silver grade), or high-performance (gold grade) fan is same.
WARNING: Ensure not to tilt or rotate the cooling fan while removing from the system.
shroud.
After working inside your system
Safety instructions
Before working inside your system
shroud.
on page 27.
on page 26.
on page 27.
Installing and removing system components 45