Connecting The 16196A/B/C/D To A Measuring Instrument - Keysight 16196A Operation And Service Manual

Installation Guide

Connecting the 16196A/B/C/D to a Measuring Instrument

Connecting the 16196A/B/C/D to a Measuring Instrument
To connect the 16196A/B/C/D Test Fixture to a measuring instrument, it is
necessary to use an adapter that fits the measuring instrument.
The 16196A/B/C/D Test Fixture is suitable for use with a high frequency LCR
Meter or Impedance Analyzer.
measuring instrument and adapter.
Table 1-5 Measuring Instruments and Adapters
Instrument
E4991A
E4991B
E4982A
E5061B-3L3/3L4/3L
5 with Opt. 005
16196A/B/C/D Test Fixture can be connected to instruments with the
4-terminal pair configuration.
Some instruments require calibration at the 7-mm connector. Perform
calibration at the 7-mm connector before connecting a test fixture. See
the operation manual of the instrument for more details.
10
Adapter
Test Head (supplied with the E4991A)
Test Head (supplied with the E4991B)
Test Head (supplied with the E4982A), Test Fixture Stand
(Opt. 710) and 3.5mm-7mm Coaxial Adapter (Opt. 720)
E4990A-120 42942A terminal adapter
16201A
Keysight 16196A/B/C/D Parallel Electrode SMD Test Fixture
Table 1-5 lists the appropriate combination of