Examples; Baud - Specify Baud Rate; Dump - Xilinx EZTag User Manual

The Batch command executes commands in a batch mode. The
bat_file must have a ".cmd" extension and contain valid EZTag
commands. Use the pound sign, "#" to precede comment lines in the
batch file.

Examples

The following examples show two methods of using the Batch
command from the EZTag prompt:
Baud — Specify Baud Rate
Syntax
Abbreviation
The Baud command specifies a communication baud rate. At
initialization, the fastest baud rate for your host system is
automatically selected. Table 4-2 lists the valid baud rates.
Table 4-2 Valid Baud Rates
X indicates valid baud rate

Dump

Syntax
Abbreviation
The dump command will read the contents of a part and create a
EZTag User Guide
batch bat_file. cmd
< bat_file. cmd
baud baud_rate
bau
Platform
9600
IBM PC X
NEC PC X
Sun X
HP 700 X
dump part_name -j file_name
EZTag with Workstations
Baud Rate
19200 38400
X X
X X
X X
115200
X
4-7