Erase; Exit - Terminate Session; Functest; Help - Online Help - Xilinx EZTag User Manual

EZTag with Workstations
JEDEC file with the results. The file created will default to
part_name.jed. Optionally, you may specify your own name using
the -j flag. The part_name must have been specified with the part
command.

Erase

Syntax
Abbreviation
This command erases the programmed contents of the specified part.
The part_name must have been specified with the part command.
Exit — Terminate Session
Syntax
Abbreviation
The Exit command terminates the current EZTag session, asks you
whether to save current program options in the xchecker.pro file, and
returns you to the system shell.

Functest

Syntax
Abbreviation
The functest command will run the functional vectors in the
associated JEDEC file (file_name) on the specified device (part_name)
using the intest command. If the part_name is the same as the JEDEC
file_name, then the file_name does not need to be specified. The
part_name must have been specified with the part command.
Help — Online Help
Syntax
Abbreviation
The Help command displays online help for the topic requested in 24-
line segments. Enter y to scroll forward to the next 24 lines. Enter n to
exit Help.
4-8
erase part_name
exit
exi
functest part_name [-j file_name]
help topic
he
Xilinx Development System