Xilinx EZTag User Manual page 54

Error Messages
Make sure the file_name file exists in your working directory or in the
environment search path. Current directory or file must have write
permission.
The file_name file does not exist in the current directory or search
path. Make sure that the file_name file exists in your working
directory or in the environment search path.
Make sure that the XACT environment variable points to the XACT
directory in the PC (the XACT directory in the PC is equivalent to the
"Installation Directory" on the workstations). Also make sure that
eztag.hlp is in the directory XACT\MSG. If you cannot find eztag.hlp
in the XACT\MSG directory, you must reinstall the XChecker
software.
Help is not available for the specified command. Refer to the
Interactive Mode Commands section in Chapter 3 for help.
Check available disk space. Current directory or file must have write
permission.
Check the file xchecker.pro in your current directory for illegal
commands. Delete the xchecker.pro file. EZTag creates a new profile
when you exit from the session.
Enter the minimum unique characters that identify the command or
enter complete commands with no abbreviations.
The command you entered is illegal. Refer to the Interactive Mode
Commands section in Chapter 3 for help.
Refer to the Interactive Mode Commands section in Chapter 3 for
help.
A-2
Error 012: Cannot open input file file_name.
Error 013: File file_name is not found.
Error 021: Help file eztag.hlp is not accessible
Error 022: No help for command command entered.
Error 023: Cannot save configuration to file_name.pro.
Error 024: Invalid command at line line number.
Error 030: Ambiguous command.
Error 031: Invalid command.
Error 032: Invalid number of arguments.
Xilinx Development System