Saving A Chain - Xilinx EZTag User Manual

1.
2.
Note: When no chain editing operation is active, selected files (by
double-clicking) are added to the end of the chain.

Saving a Chain

To save an EZTAG chain description for later use, create a Chain
Description File (.cdf) using:
A screen titled CDF File Operation will appear. This screen will
allow you to select a directory and path to place the file in. You can
also name the file, but you should retain the .cdf file extension.
To name your file, use the mouse to highlight the asterisk (*) on the
File Name line, then type in the name you want and click once on
OK.
Figure 3-6 Saving a File
EZTag User Guide
With the mouse, click once on the number (#) in the Chain
Description. The number column is found to the left of the
Device Type. The #, Device Type and File Name on that
row should be highlighted.
Click the Delete softkey once. The highlighted line will be
deleted and all items in the chain below that line will move up
one place in the chain.
File Save
In-System Tutorial for PCs
3-7