Modifying A Chain - Xilinx EZTag User Manual

Note: The Chain Description has a scroll bar to the right of it
that will allow you to scroll around in the chain. If your chain has
more than three entries, this bar is necessary to view them all.
Figure 3-5 EZTAG Menu showing Operation Options
6.
Note: It will take between thirty and sixty seconds to download to a
part using the Silicon Evaluation Release software.

Modifying a Chain

The Chain Editing Operations are located on the EZTAG
menu. They softkeys listed as Insert, Change, and Delete. In
EZTag User Guide
part. Bypass is the only supported mode of Operation for non-
FastFLASH parts.
Select the Execute button. Download will begin. When Execute
works properly a DOS window appears and delivers processing
messages. When processing has completed, a message log
appears and lets you know the status and results of the execu-
tion. If any errors occur, they will be listed in the message log.
In-System Tutorial for PCs
3-5