Xilinx EZTag User Manual page 33

EZTag User Guide
3.
Figure 3-4 EZTAG Menu with U1 Set for Programming and U2
Set in Bypass Mode.
4.
5.
3-4
Invoke the EZTAG-JTAG Download Software menu by double-
clicking the EZTAG-JTAG Download Software icon.
Select the operations desired for each XC95108 part.
a) Under Device Programming Files find the disk and
directory containing the files you want to use.
b) Double-click on the file name. The Device Type and File
name should appear in the Chain Description.
c) Click once on the Operation down arrow to select the type
of operation you want to select. Select Program (this is the
default).
Select Bypass for each non-XC-9500 part. These parts will
appear under Device BSDL Files. Double-click on the file for
each part so that it appears in the Chain Description. Note
that Bypass is selected as the default Operation of each foreign
Xilinx Development System