EZTag User Guide
serial port for further processing.
Table 2-1 Valid Baud Rates
Platform
IBM PC
NEC PC
SUN
HP 700
X indicates supported baud rate
Connecting the XChecker Cable
There are two simple steps for connecting the cable:
l
l
Connecting the XChecker Cable to Your Workstation
On workstations the XChecker cable connects to your system RS-232
serial port. You may need a DB-9/DB-25 adapter, which
accommodates most serial ports, so that you can connect the
XChecker cable to your host system.
Connecting the XChecker Cable to Your PC
On PCs you can connect a serial XChecker cable connects to your
system RS232 serial port (you may need a DB9/DB25 adapter). The
EZTag software will automatically identify thy XChecker cable when
correctly connected to your PC. If you choose to, you may also select
this connection manually. To set up a serial port manually:
2-4
Baud Rate
Connect the cable to your host system serial port.
Connect the cable to your target system.
Cable
Serial Port
9600
19200
38400
X
X
X
X
X
X
X
[ Comn ]
Xilinx Development System
115.2K
X
X
X
X