Kongsberg Simrad EK80 Installation Manual page 9

Installing navigation sensors and other sensors ...................................................228
Defining the serial and Ethernet (LAN) port parameters .....................................230
Setting up the input from a navigation system (GPS) ..........................................231
Configuring the sensor interface...........................................................................234
Setting up a serial or LAN (Ethernet) port for annotation input ..........................235
Connecting a catch monitoring system to a serial or LAN (Ethernet) port ...........237
Connecting a trawl system to a serial or LAN (Ethernet) port.............................239
Setting up the input from a motion reference unit (MRU)...................................241
Setting up the input from a sound speed sensor ...................................................243
Setting up depth output to an external system......................................................245
Exporting sensor data to a peripheral system .......................................................247
Synchronizing the EK80 by means of a serial port ..............................................249
Synchronizing the EK80 by means of the Auxiliary port ....................................252
Setting up the interface between the EK80 and the Simrad TD50.......................254
Test procedures ..............................................................................................................256
Functional test of the EK80 Wide band scientific echo sounder..........................257
Measuring noise in passive operating mode.........................................................259
Reading the transceiver hardware and software versions ....................................261
Verifying the communication with the course gyro .............................................263
Verifying the communication with a navigation system (GPS) ...........................265
Verifying the communication with speed log.......................................................267
Verifying the communication with the motion reference unit (MRU) .................269
Verifying the communication with a synchronization system..............................271
Making a noise/speed curve to determine vessel noise ........................................273
Turning off the EK80 .....................................................................................................276
Installation remarks........................................................................................................278
TECHNICAL SPECIFICATIONS.............................................. 279
Introduction to technical specifications .........................................................................280
Interface specifications...................................................................................................281
Supported datagram formats for annotation data .................................................281
Supported datagram formats for distance information.........................................282
Supported datagram formats for drop keel offset information.............................282
Supported datagram formats for external depth input..........................................283
Supported datagram formats for position information .........................................283
Supported datagram formats for heading and gyro information ..........................284
Supported datagram formats for trawl information..............................................284
Supported datagram formats for motion information...........................................285
Supported datagram formats for palette control...................................................286
Supported datagram formats for catch monitoring information...........................286
Supported datagram formats for sound speed sensors .........................................287
394149/D
Installation Manual
7