Simrad EK80 Installation Manual
A
Connectors 1 through 6 as indicated by the arrows.
Note that each of the two connector elements can be pulled out
of the IO Module for easy access.
Configuration board
B
Unless otherwise specified, this cable must be provided by the
installation shipyard.
Minimum cable requirements
•
: 2 x 5 x 0.5 mm
Conductors
•
: Overall braided
Screen
•
: 60 V
Voltage
•
Maximum outer diameter
gland
If you need to install a very long cable, increase the cross section.
Related topics
Cable drawings and specifications, page 136
Cable layout and interconnections, page 85
150
2
: Defined by the plugs and/or the cable
394149/D