Kongsberg Simrad EK80 Installation Manual page 31

For more information about our transducers, see our website.
• https://www.kongsberg.com/td
Related topics
Additional required items, page 27
Scope of supply, page 25
Simrad EK80, page 13
Ethernet switch
If you use more than one Wide Band Transceiver (WBT), a high capacity Ethernet
switch is required. The Ethernet switch is used to connect each Wide Band Transceiver
(WBT) to the Processor Unit.
Related topics
Additional required items, page 27
Scope of supply, page 25
Simrad EK80, page 13
Motion Reference Unit (MRU)
ADCP operations cannot take place without input from a motion reference unit (MRU).
In order to operate correctly with the EC150-3C, the EK80 requires input from a motion
reference unit (MRU).
Note
Without the input from a motion reference sensor, the EK80 will not be able to
compensate for the vessel movements. The input must be provided on the KM Binary
datagram format.
The EK80 has been designed to match the motion reference unit (MRU) sensors
manufactured by our Seatex division. Descriptions of all available MRU types are
provided on our website.
• https://www.kongsberg.com/mru
394149/D
Simrad EK80
29