Kongsberg Simrad EK80 Installation Manual page 75

c Observe the compass safe distance.
d Make sure that enough space is made available for maintenance purposes.
e Make sure that adequate ventilation is available to avoid overheating.
f Make sure that the installation method allows for the physical vibration,
movements and forces normally experienced on a vessel.
Note
In order to allow for future maintenance, we recommend to mount the unit with its
cables and connectors available for easy access.
3 Make sure that the chosen location meets the installation requirements.
4 Provide ample space around the computer.
You must be able to reach and use the front and rear mounted connectors and
devices. It is also important that you allow for easy access to all the cables, and
enough space for inspection, maintenance and parts replacement. If relevant, make
sure that the space allows you to open the computer for unobstructed access to
its internal parts.
Note
Make sure that you can access both the rear and front side of the computer after it
has been installed.
5 Install the computer.
Observe the applicable documentation provided by the manufacturer.
6 Connect the cables.
Note
When you connect the cables, make sure that they are all properly secured, and able
to withstand the vibration and movements of the vessel.
Related topics
Installing the EK80 hardware units, page 64
Equipment handling, page 320
Compass safe distance, page 301
394149/D
Installing the EK80 hardware units
73