e
On the
Transceiver Installation
transceiver(s).
•
Turning on the EK80 for the first time, page 199
•
Installing and troubleshooting Network Time Protocol (NTP), page 214
•
Configuring the EK80 for normal operation, page 224
3
Set up the interfaces with the external devices (navigation sensors and other
peripherals).
To provide correct information, the EK80 needs to communicate with external
devices. All these interfaces must be set up in the EK80 user interface.
•
Interfacing peripheral equipment, page 228
4
Make sure that the EK80 is fully operational
To make sure that the EK80 fulfils all operational and functional requirements,
specific tests are provided.
•
Test procedures, page 256
5
Fill in and sign the Installation Remarks form, and return it to Simrad.
394149/D
page, connect the transducer(s) to the
Setting to work
187