Kongsberg Simrad EK80 Installation Manual page 118

Simrad EK80 Installation Manual
Setting up the Moxa CP114EL-I serial ports
The interface ports provided by the
using a dedicated driver application in the operating system.
Prerequisites
This procedure is made for the Microsoft
that you are familiar with this operating system. Operation in Microsoft
10 is very similar.
Context
As long as you do not change the Processor Unit
to another computer, or replace the serial adapter
in your Processor Unit, you will only need to do
this once.
Note
This information is intended for certified
maintenance technicians and service engineers
from Kongsberg Maritime, or from a certified
dealer, distributor or agent. It is assumed that
you are familiar with the Windows
systems, computer technology, and interface
principles. We strongly advise our end users not
to alter the parameters described.
Procedure
→
1 Select
Start Control Panel
2 On the left side, select
3 In the
Device Manager
a Expand the
b Double-click
utility.
c Observe that the dedicated properties dialog box opens.
4 Open tab
Ports Configuration
5 Select
Port Setting
116
Moxa CP114EL-I
®
® operating
→
System
Device Manager
dialog box:
Multi-port serial adapters
Moxa CP114EL Series (PCI Express Bus)
, and select the serial port you wish to configure.
to open the configuration dialog box
serial adapter board are configured
Windows ® 7 operating system. It is assumed
.
.
option.
® Windows ®
to open the configuration
394149/D