Kongsberg Simrad EK80 Installation Manual page 154

Simrad EK80 Installation Manual
Screen (Cable screen) (Green)
A
Input (Ready to Transmit (RTT))
B
Ground (Signal ground)
C
Output (Trigger Out)
D
E Make the connections here.
Channels (From left)
F
Minimum cable requirements
Unless otherwise specified, this cable must be provided by the installation shipyard. If
you need to install a very long cable, increase the cross section.
• : 2 x 2 x 0.5 mm
Conductors
• : Overall braided
Screen
• : 60 V
Voltage
•
Maximum outer diameter
Related topics
Cable drawings and specifications, page 136
Cable layout and interconnections, page 85
152
2
: Defined by the plugs and/or the cable gland
394149/D