•
Create an initial configuration file with the following settings
•
Predefined public NTP servers
•
Specify the NTP server IP address
Master clock, this is an exmaple)
•
Use fast initial sync mode (iburst)
•
Add local clock as a last resort reference, Stratum
Select
to continue.
Next
8
Select
for not reviewing the generated config file.
No
9
Select service settings in the
Select the following options by checking the check boxes:
•
SYSTEM account
•
Start NTP service automatically
•
Disable other Time Services eventually installed (e.g. W32Time, other NTP flavours)
•
Start NTP service right after installation
•
Allow big initial timestep (<1000 s)
•
Enable Multimedia Timer at startup
394149/D
:
.
None
:
10.124.24.200
Setting up NTP service
Setting to work
(Use the IP address of your
: 12
page.
217