Kongsberg Simrad EK80 Installation Manual page 157

Cable layout and interconnections
Cable connections versus software licenses
When more than one transducer shall be connected to the Wide Band Transceiver
(WBT), your software license must support this. If necessary, additional licenses must be
purchased. If you have only one license, connect your transducer to sockets H and J on
the 12-pin Amphenol socket. For additional licenses, connect as follows:
License 1 License 2 License 3 License 4
H J E F D B
C A
Minimum cable requirements
Not applicable. If you need an extension cable, contact your dealer (or Kongsberg
Maritime) for support.
Related topics
Cable drawings and specifications, page 136
Cable layout and interconnections, page 85
201575 Transducer connector assembly and wiring, page 318
155
394149/D