Kongsberg Simrad EK80 Installation Manual page 229

• Select
Common
• Select
Auto
• Select
Individual
channels.
The
Stored sampled data for WBTs running CW
the amount of recorded data when you are using a Wide Band Transceiver
(WBT) with CW pulses.
• Select
Complex samples
• Select
Power/Angle
• Select
Reduced sampling rate Power/Angle samples
Note
Unless you choose
information.
The
Motion Data Recording
motion data are saved in the raw data file.
5 At the bottom of the page, select
6 Select to close the dialog box.
OK
Related topics
Configuring the EK80 for normal operation, page 224
Setting to work, page 185
394149/D
to use the same recording range for all your active channels.
to allow the EK80 to automatically find the required range value.
to use the different recording ranges for your active
to use the default data format.
to reduce the file sizes.
Complex samples
function allows you to control how often the
to save your settings.
Apply
options can be used to reduce
to minimize the file sizes.
your RAW data files will contain less
Setting to work
227