Kongsberg Simrad EK80 Installation Manual page 137

Note
If you use more than one Wide Band Transceiver (WBT) in your EK80 system, all
synchronization input signals to the
source. Individual synchronization of a single Wide Band Transceiver (WBT) is not
supported.
If you use more than one computer in your EK80 system, the synchronization inputs to
Auxiliary
the ports can not be used. This functionality is not supported.
The
Synchronization Delay
your Wide Band Transceiver (WBT) to synchronize the EK80.
Procedure
1 Connect the dedicated cable from the Wide Band Transceiver (WBT) to the external
synchronisation system.
This is described in the Cable layout and interconnections chapter. Observe the
applicable requirements related to cabling.
2 Turn on the EK80, and set it to normal use.
3 Open the
Setup
4 On the menu, select
Setup
Observe that the
of pages selected from the menu on the left side.
5 On the left side of the
6 From the list of ports available, select
7 Observe that when
mode is permitted.
Slave mode is used if the EK80 is going to transmit only when permitted by a
peripheral system. When Slave mode is selected, the EK80 does not transmit
("ping") unless an external trigger appears on the chosen synchronization port. The
peripheral system may be any other hydroacoustic product (for example an echo
sounder or sonar), or even a dedicated synchronization system.
8 At the bottom of the page, select
9 Continue your work in the
Related topics
Setting up the EK80 in a synchronized system, page 126
Cable layout and interconnections, page 85
Interfacing peripheral equipment, page 228
394149/D
Auxiliary
functionality is unavailable if you use the
menu.
Installation
dialog box opens. This dialog box contains a number
Installation
dialog box, select
Installation
Transceiver Auxiliary Port
Apply
Installation
Cable layout and interconnections
ports must be provided by the same
.
Synchronization
Transceiver Auxiliary Port
is selected, only Slave synchronization
to save your settings.
dialog box, or select
Auxiliary
port on
.
.
to close it.
OK
135