Simrad EK80 Installation Manual
The transducer is normally mounted flush
with the hull plating or the bottom of a
blister. A clamping ring is used to secure
the transducer body to a mounting ring.
The mounting ring is welded into the hull
plating.
The transducer can also be flush mounted
in the same manner at the bottom of a
blister or a drop keel.
The transducer cable penetrates the hull
using a cable gland. This cable gland
consists of a bushing, washers, a rubber
gasket and a packing nipple.
Related topics
Main system units, page 19
Simrad EK80, page 13
24
394149/D