Kongsberg Simrad EK80 Installation Manual page 209

transducer. You can not see this information, but it is used by the EK80 to set up the
operational parameters. This allows each transceiver to optimise its performance for
the individual transducer models.
If you cannot find your transducer in the list, contact you dealer, agent or Kongsberg
Maritime to upgrade the relevant software component in the EK80.
Note
Just making changes and selecting
Select what to install, define the relevant parameters, and then select
If your EK80 shall only be used with an ADCP transceiver for current profiling, you
do not need to install other transducers.
Procedure
1 Open the
Setup
2 On the menu, select
Setup
Observe that the
of pages selected from the menu on the left side.
3 On the left side of the
4 Select the transducer you wish to install from the
Note
Make sure that you select a transducer that is supported by your current license.
5 Insert the serial number.
This serial number is very important, because you will need it as a reference
identification when the EK80 is calibrated. Some new Simrad transducers with
built-in "intelligence" will automatically provide this serial number.
6 Type the name you wish to use into the
Type any name that you wish to use to identify the transducer. The name you select
will only be used to identify the transducer in other dialog boxes. It is not used in
the echo data that you export. If you do not have a computer keyboard connected to
your EK80 system, select the
7 Select mounting method.
8 Specify the orientation of the transducer beam.
9 If relevant for your transducer installation, provide the accurate physical location of
the transducer with reference to the vessel's coordinate system.
394149/D
at the bottom of the page will not install anything.
OK
menu.
Installation
dialog box opens. This dialog box contains a number
Installation
dialog box, select
Installation
Keyboard
.
Transducer Installation
list.
Model
box.
Custom Name
button to open an on-screen keyboard.
Setting to work
.
Add
.
207