Kongsberg Simrad EK80 Installation Manual page 72

Simrad EK80 Installation Manual
c Make sure that enough space is made available for maintenance purposes.
d Make sure that adequate ventilation is available to avoid overheating.
e Make sure that the installation method allows for the physical vibration,
movements and forces normally experienced on a vessel.
Note
In order to allow for future maintenance, we recommend to mount the unit with its
cables and connectors available for easy access.
4 Make sure that the chosen location meets the installation requirements.
5 Bulkhead installation
a Mount the wall bracket using suitable bolts or screws.
b Place the power supply in the bracket so that the small lamp is visible.
6 Desktop installation
a Place the unit in a suitable location.
b Position and fasten the unit using the bracket and the mounting screws.
7 "Ad hoc" installation
a Place the unit in a suitable location (horizontally or vertically).
b Position and fasten the unit using any means available.
8 Connect the cables.
Note
When you connect the cables, make sure that they are all properly secured, and able
to withstand the vibration and movements of the vessel.
Related topics
Installing the EK80 hardware units, page 64
388697 Wide Band Transceiver (WBT) outline dimensions, page 308
Equipment handling, page 320
Compass safe distance, page 301
70
394149/D