Kongsberg Simrad EK80 Installation Manual page 257

Context
All the steps in this procedure are done in the EK80 user interface.
Procedure
1 Open the
Setup
2 On the menu, select
Setup
.
Installation
3 On the left side of the
dialog box, select
Installation
Remote Control
a Select the
Local IP Address
This is the Internet Protocol (IP) address of the Ethernet interface adapter
located in your Processor Unit.
b Keep the present value in
4 Select
Remote Control
5 Provide relevant application information.
6 At the bottom of the page, select
7 Select to close the dialog box.
OK
Related topics
Interfacing peripheral equipment, page 228
394149/D
menu.
and then to open the page.
As Server
.
Local Port
, then
Application Information
Apply
.
to open the page.
to save your settings.
Setting to work
255