Encoder Cable; Mr-Aekcbl_M - Mitsubishi Electric MELSERVO-J5 HK Series User Manual

5.3

Encoder cable

MR-AEKCBL_M-_

The servo amplifier and the rotary servo motor cannot be connected by these cables alone. The motor cables for rotary servo
motors (MR-AEPB2J10CBL03M-_-L/MR-AEP2J10CBL03M-_-L) are required.
Model
The following describes what each block of a model name indicates. Not all combinations of the symbols are available.
M R - A E K C B L 2
Connecting the servo amplifier and rotary servo motor
This connection is for when electromagnetic brake cable is included.
MR-J5 1-axis
servo amplifier
CN2
MR-J5 multi-axis
servo amplifier
(1)
CN2A
CN2B
CN2C *1
*1 This connection is for the MR-J5 3-axis servo amplifier.
*2 Refer to the following for connection of the power connector.
Page 35 Wiring
5 WIRING OPTION
80
5.3 Encoder cable
0 M - L
Flex type
Symbol Flex type
L Standard (for fixed parts)
H High flex life (for moving parts)
Cable length
Symbol Cable length [m]
20 20
30 30
40 40
50 50
MR-AEKCBL_M-_
(2)
MR-AEPB2J10CBL03M-_-L
MR-AEP2J10CBL03M-_-L
*2
Rotary servo motor