Chapter 9 Compliance With Each Region; Compliance With Ce Marking; Ce Marking; For Compliance - Mitsubishi Electric MELSERVO-J5 HK Series User Manual

9
COMPLIANCE WITH EACH REGION
The HK-RT_4W will be available in the future.
9.1

Compliance with CE marking

CE marking

The CE marking is mandatory and must be affixed to specific products placed on the market in the European Union. When a
product complies with the requirements (directives), the CE marking must be affixed to the product. The CE marking also
applies to machines and equipment on sale in the European Union area that incorporate servo motors. Each manual is
available in different languages. For details, refer to our website or contact our local sales office.
EMC directive
The EMC directive also applies to the rotary servo motor as a single unit. Therefore, the rotary servo motor is designed to
comply with the EMC directive. The EMC directive also applies to machines and equipment incorporating rotary servo motors.
The HK-KT and HK-ST series comply with EN61800-3 Category 3. These series are not intended to be used on a low-voltage
public network which supplies domestic premises. When used on such network, radio frequency interference may occur. The
installer must provide a guide for installation and use, including the recommended mitigation devices.
Low-voltage directive
The low-voltage directive also applies to the rotary servo motor as a single unit. The rotary servo motor is designed to comply
with the low-voltage directive.
Machinery directive
The rotary servo motor as a single unit falls under Article 1 2. (k), and therefore is not subject to the Machinery directive.
However, the Machinery directive does apply to machines and equipment incorporating rotary servo motors. Please check if
the machines and equipment as a whole are in compliance.

For compliance

Be sure to perform an appearance inspection of every unit before installation. In addition, perform a final performance
inspection on the entire machine, and keep the inspection record.
Wiring
Use EN compliant products for wiring the power supply of the rotary servo motor. Products that comply with EN are available
as options. For options, refer to the following.
Page 58 WIRING OPTION
Performing EMC tests
The EMC test of machines and devices that incorporate servo amplifiers and rotary servo motors must meet electromagnetic
compatibility (immunity/emission) standards and satisfy the environment and electrical equipment specifications to be used.
For EMC directive compliance methods relating to servo amplifiers and rotary servo motors, refer to "EMC Installation
Guidelines".
9 COMPLIANCE WITH EACH REGION
204
9.1 Compliance with CE marking