Table of Contents
Advertisement
Section 3 - Configuration
You can configure several LAN settings for your network. It is not recommended to change these settings from factory default.
This feature is only available in Router mode.
Enable UPnP:
Click to enable Universal Plug and Play (UPnP) for
network devices.
Enable WAN Ping
Click to enable the DAP-1260L's WAN port to
Respond:
respond to ping requests from the Internet.
Enable Remote
Click to enable remote management of the DAP-
Management:
1260L from anywhere over the Internet.
Save Settings:
Click Save.Settings to save and activate the new
changes.
D-Link DAP-1260L User Manual
Advanced Network
50
Advertisement
Table of Contents
