Table of Contents
Advertisement
DAP-300P Wireless N300 PoE Access Point / Router
User Manual
VLAN
This page is available if the Router or WISP Repeater mode was selected in the Initial
Configuration Wizard.
On the Advanced / VLAN page, you can edit existing and create new virtual networks (VLAN),
e.g., for distinguishing traffic or specifying additional WAN interfaces.
By default, 2 VLANs are created in the access point's system:
•
lan: for the LAN interface, it includes the LAN port and Wi-Fi networks. You cannot delete
this VLAN.
•
wan: or the WAN interface; it includes the WAN (PoE) port. You can edit or delete this
VLAN.
If you want to create a VLAN including the LAN port or available Wi-Fi networks of the access
point, first delete relevant records from the lan network on this page. To do this, select the lan line.
On the opened page, in the Untagged Ports section, deselect the checkbox located to the left of
the relevant element, and click the APPLY button.
Figure 104. The Advanced / VLAN page.
Page 124 of 175
Configuring via Web-based Interface
Advertisement
Table of Contents
