Figure 5-24: Vga Connector - IEI Technology WSB-9152 User Manual

WSB-9152 PICMG 1.0 SBC
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA
insert the male connector from the VGA screen into the female connector on the
WSB-9152. See Figure 5-24.

Figure 5-24: VGA Connector

Step 4: Secure the connector. Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector.
connector. Once the connectors are properly aligned with the
Step 0:
Page 101