Figure 5-19: Sata Drive Cable Connection - IEI Technology WSB-9152 User Manual

Figure 5-19: SATA Drive Cable Connection

Step 3: Connect the cable to the SATA disk. Connect the connector on the other end
of the cable to the connector at the back of the SATA drive. See Figure 5-20.
Step 4: Connect the SATA power cable. Connect the SATA power connector to the
back of the SATA drive. See Figure 5-20.
Page 96
WSB-9152 PICMG 1.0 SBC
Step 0: