Table of Contents
Advertisement
5.5 Chassis Installation
5.5.1 Airflow
WARNING:
Airflow is critical to the cooling of the CPU and other onboard
components. The chassis in which the WSB-9152 is installed must
have air vents to allow cool air to move into the system and hot air to
move out.
The WSB-9152 must be installed in a chassis with ventilation holes on the sides allowing
airflow to travel through the heat sink surface. In a system with an individual power supply
unit, the cooling fan of a power supply can also help generate airflow through the board
surface.
NOTE:
IEI has a wide range of backplanes available. Please contact your
WSB-9152 vendor, reseller or an IEI sales representative at
sales@iei.com.tw
to find out more about the available chassis.
5.5.2 Backplane Installation
Before the WSB-9152 can be installed into the chassis, a backplane must first be installed.
Please refer to the installation instructions that came with the backplane and the chassis
to see how to install the backplane into the chassis.
Page 86
WSB-9152 PICMG 1.0 SBC
or visit the IEI website (http://www.ieiworld.com.tw)
Hide quick links:
Advertisement
Table of Contents
