Figure 5-4: Cooling Kit Support Bracket; Figure 5-5: Connect The Cooling Fan Cable - IEI Technology WSB-9152 User Manual

Figure 5-4: Cooling Kit Support Bracket

Step 4: Tighten the screws. Use a screwdriver to tighten the four screws. Tighten each
nut a few turns at a time and do not over-tighten the screws.
Step 5: Connect the fan cable. Connect the cooling kit fan cable to the fan connector
on the motherboard. Carefully route the cable and avoid heat generating chips
and fan blades. See Figure 5-5.

Figure 5-5: Connect the cooling fan cable

Page 78
WSB-9152 PICMG 1.0 SBC
Step 0: