Revert A Hard Drive To Non-Raid - IEI Technology WSB-9152 User Manual

WSB-9152 PICMG 1.0 SBC

7.6 Revert a Hard Drive to Non-RAID

If one hard drive comes from another RAID array and it's been added to the system, this
option will change it back into a non-RAID drive so it can be added to a new RAID array or
used as a normal hard drive.
Step 1: Highlight the "Revert HDD to Non-RAID" menu option and press ENTER.
Figure A-1: Select "Revert HDD to Non-RAID"
Step 2: Highlight the drive to revert to a non-RAID disk. Press SPACE to mark it. Repeat
for all the drives you want to revert to non-RAID. Press DEL to confirm.
Figure A-2: Choose Drives to Revert to Non-RAID
Page 159