Available Software Drivers; Driver Cd Auto-Run - IEI Technology WSB-9152 User Manual

8.1 Available Software Drivers

NOTE:
The content of the CD may vary throughout the life cycle of the product
and is subject to change without prior notice. You may visit the IEI
website or contact technical support for the latest updates.
The following drivers can be installed on the system.
Chipset driver
VGA driver
LAN driver
Installation instructions are given below.

8.2 Driver CD Auto-run

All the drivers for the WSB-9152 are on the CD that came with the system. To install the
drivers, please follow the steps below.
Step 1: Insert the CD into a CD drive connected to the system.
Step 2: The installation program starts up automatically
Step 3: Select WSB-9152 from the initial menu shown in Figure 8-1.
Page 168
WSB-9152 PICMG 1.0 SBC