Cpu Card Installation; Internal Peripheral Device Connections; Peripheral Device Cables; Table 5-6: Iei Provided Cables - IEI Technology WSB-9152 User Manual

WSB-9152 PICMG 1.0 SBC
NOTE:
IEI has a wide range of backplanes available. Please contact your
WSB-9152 vendor, reseller or an IEI sales representative at
sales@iei.com.tw
to find out more about the available chassis.

5.5.3 CPU Card Installation

To install the WSB-9152 CPU card onto the backplane, carefully align the CPU card
interface connectors with the corresponding socket on the backplane. To do this, please
refer to the reference material that came with the backplane. Next, secure the CPU card to
the chassis. To do this, please refer to the reference material that came with the chassis.

5.6 Internal Peripheral Device Connections

5.6.1 Peripheral Device Cables

The cables listed in Table 5-6 are shipped with the WSB-9152.
Quantity Type
1 DVI cable
1 IDE cable
1 RS-232 cable
2 SATA drive cables
1 SATA drive power cable
1 USB cable with bracket

Table 5-6: IEI Provided Cables

Optional cables are listed below:
LPT cable
FDD cable
5-pin wafer-to-PS/2 cable for mouse or keyboard
or visit the IEI website (http://www.ieiworld.com.tw)
Comments
Only WSB-9152DVI and WSB-9152SDVI
4 on WSB-9152S and WSB-9152SDVI
2 on WSB-9152S and WSB-9152SDVI
Page 87