Table of Contents
Advertisement
18
User Guide
Using the Digital Pressure Meter
In some cases, it may be necessary to get a more accurate reading of the current vacuum level
in the tub, or you would like to be able to measure the current DeltaP in the test package.
For this purpose you can use the Digital Pressure Meter (Option - see
page 32
NOTE! Please refer to the user guide that comes with the device for details about
settings and operation.
Connection
The device comes complete with all the fittings needed to connect it to the LeakPointer H
Remove the plug
able to remove the plug).
Disconnect the hose
far as it goes into the fitting, then check the connection by pulling the hose slightly
backwards.
Now you are ready to either measure the chamber vacuum or the package DeltaP as
described on
P/N 390225-C
11/2021
for details).
from the fitting
from the device and connect it to the fitting
page
19.
EN
Dansensor
(press the blue sleeve inwards on the fitting to be
LeakPointer H
O
®
2
"Options/Accessories" on
O.
2
. Push the hose as
Advertisement
Table of Contents
