Table of Contents
Advertisement
42
4.3.17.1 Network Time Protocol Support
Configure the Network Time Protocol feature in the Date and Time screen
Network Time Protocol support enables you to set a server to provide your NetGuardian the correct date and time,
so you don't have to enter the information if your NetGuardian loses power or has to be reset to factory settings.
To enable Network Time Support:
1.
From the
menu select
Edit
2.
Click on the
Time Zone
3.
Put a check next to
4.
Enter the IP of the network time server in the
Note: To disable NTP support, simply set the Time Server IPA to 255.255.255.255
6.
Click
Submit Data
4.3.18 PPP Modes
Configure the PPP port settings in the Edit menu > PPP screen
If the LAN connection to your remote sites fails, you can still keep in touch with your remote equipment by using
Date and Time.
drop-down menu and select the appropriate time zone.
if you are in an area that observes daylight saving.
Observe DST
to save the date and time settings.
field.
Time Server IPA
Advertisement
Table of Contents
Need help?
Do you have a question about the NetGuardian 420 and is the answer not in the manual?
Questions and answers