Functions That Can Be Assigned To User-Defined Keys - Yamaha M7CL Owner's Manual

Functions that can be assigned to user-defined keys

FUNCTION
NO ASSIGN —
INC RECALL
DEC RECALL
SCENE DIRECT RECALL
RECALL UNDO
STORE UNDO
TALKBACK ON
TALKBACK
SELECTED CH ASSIGN
OSCILLATOR ON
OSCILLATOR
SELECTED CH ASSIGN
CUE CLEAR —
MONITOR ON
SELECTED CH ASSIGN
MONITOR
SOURCE SELECT
DIMMER ON
MONO MONITOR
EFFECT BYPASS RACK 5–8
CURRENT PAGE
TAP TEMPO
RACK 5–8
MUTE MASTER MUTE GROUP 1–8
METER PEAK HOLD ON
BRIGHTNESS BANK CHANGE
PAGE BOOKMARK
PAGE CHANGE
CLOSE POPUP
CH SELECT INC, DEC
SEND ENCODER TO MIX/TO MATRIX
SET [+48V]
SET [Ø]
SET [INSERT ON]
SET [DIRECT OUT ON]
SET BY SEL
SET [PRE SEND]
SET [TO STEREO]
SET [TO MONO]
SET [TO LCR]
280
M7CL Owner's Manual
Functions that can be assigned to user-defined keys
PARAMETER 1 PARAMETER 2
—
—
—
SCENE #000–#300
—
—
LATCH
UNLATCH
—
—
—
—
—
—
(M7CL-32/48)
STEREO L/R, MONO(C), LCR,
STIN1–4, DEFINE
(M7CL-48ES)
STEREO L/R, MONO(C), LCR,
OMNI1–8, DEFINE
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Explanation
No assignment.
Recall the scene of the next existing number.
Recall the scene of the previous existing number.
Directly recall the scene of the specified number.
Execute RECALL UNDO.
Execute STORE UNDO.
Switch TALKBACK on/off.
Turn TALKBACK on while pressed.
While holding down this key, press a SEL key of an OUTPUT chan-
nel to switch the assignment on/off. During this time, the [SEL]
LED will be lit if assign is ON, or dark if OFF.
The assignment setting made while holding down this key will be
stored. Pressing the key again will recall the stored setting. Settings
can be stored in multiple keys to facilitate rapid assignment switch-
ing.
Switch the OSC on/off.
While holding down this key, press a SEL key of an OUTPUT chan-
nel to switch the assignment on/off. During this time, the [SEL]
LED will be lit if assign is ON, or dark if OFF.
Clear all CUE settings together.
Switch MONITOR on/off.
While holding down this key, press the SEL key of a MIX or MATRIX
channel to switch the assignment on/off. During this time, the
[SEL] LED will be lit if assign is ON, or dark if OFF.
The assignment setting made while holding down this key will be
stored. Pressing the key again will recall the stored setting. Settings
can be stored in multiple keys to facilitate rapid assignment switch-
ing.
Recall the selected signal to the monitor.
Switch the monitor dimmer function on/off.
Switch MONO MONITOR on/off.
Bypass the specified effect.
Use the tap tempo function in the displayed screen.
Use the tap tempo function for the specified effect.
Switch MUTE GROUP MASTER on/off.
Turn the meter PEAK HOLD function on/off.
Toggle between the brightness settings stored in A and B.
Memorize the currently selected screen (hold down the key for two
seconds or longer), or display the last-memorized screen (press
and release the key within two seconds). Popup screens can also be
memorized. In the case of a rack, the number of that rack is also
memorized.
Close the displayed popup window.
Decrement the channel selection.
If INPUT or ST IN is selected, swich the function of the Selected
Channel section's send encoders from TO MIX/TO MATRIX.
Hold down this key and press SEL to switch it on/off.
During this time, the [SEL] LED will be lit if on or dark if off.
If SET [PRE SEND] is selected, "SEND ON FADER" mode is engaged
while you are holding down the [SEL] key.